Function Model |
ROS-2210 |
RO collecting point |
No water protection, low pressure protection, high pressure protection, pure water tank high level protection, exterior operation, reset. |
RO controlling point |
Inlet water valve, flush valve,raw water pump, high pressure pump, conductivity over limit discharge valve |
Measurement Range |
Source water: Conductivity : 0~4000μS/cm,
Produced water: 0-2000uS/cm
Temperature: 0~50℃ |
Resolution ratio |
Conductivity 0.1μS/cm, Temperature 0.1℃ |
Accuracy |
Conductivity ≤1.5%, Temperature ≤0.5℃ |
Temperature compensation |
Automatic digital compensation with 25℃ as reference temperature |
Working environment |
Ambient Temp. 0~50℃, Relative Humidity ≤85% |
Electrode |
1.0cm-1 electrode, with 5m Length cable |
Electric control |
ON single contact relay, dry contact (on power) inside output |
Flush way |
High pressure flush, low pressure flush |
Display |
3 1/2 digits red LED digital display |
Contact capacity |
AC 250V/3A Max;AC 115V/10A Max(Resistance load) |
Power |
AC 220V+/-15% 50Hz |
Dimensions |
96×96×130mm (H X W X D) |
Hole size |
92×92mm (H X W)(Embeded) |